needmonero90 The "division by zero" was a joke in reference to the "non-reserve" thing :)

Are Romellos trackable?

hi folks, i am running monerod on one machine on my LAN and then trying to run wallet-cli on another machine, there isn't any firewall issues between them and they are both in default config, any reason why the wallet can't find the daemon on the standard port, am I am running monerod vanilla with no options atm. thx.

running wallet-cli with --daemon-host

do i need to use the public-node option on monerod if it's not on the same machine as the wallet software?

Don't forget --rpc-bind-ip

On monerod

TrasherDK1: thx. so i should bind that to my local IP address of the monerod machine?

do i need to set an rpc username and pass? do you know if i need to set the public-node option?

msg/ nickserv set cloak on

TrasherDK1: thanks for the hint. I ran rpc-bind-ip which I think would be good, but then it warned me about non encrypted traffic, which in my case, probably didn't matter, but I decided to do an ssh tunnel instead. :)

which seems to be working well.

What do you guys think of the incognito project? in terms of privacy, does it offer a solution that helps Monero?

what is the incognito project?

Exactly.

hi

any LocalBitcoins user here? need help for a dispute

incognito[dot]org

It´s all a bit vague, trying to understand it better.

some LocalBitcoins vendor here?

need help for a dispute

Shizlet8: the devs control most of the network (including some scary sounding "beacon" node), and they control over 80% of the coin supply via a premine. doesn't sound good

hi

hi

Shizlet: currently, you give them your xmr, they give you an IOU, and then you trade the xmr for a BTC IOU, and bring it back to them to be cashed out.

TrUsTlEsS

Shizlet8

asymptotically, needmonero90 What could possibly go wrong -.-

Shizlet8 the mods made a decision to remove their exchange ads for false advertising, they bury the lede on the 'decentralization' pretty hard

We do not recommend using them in their current state

asymptotically, Where did you get those numbers?

it was a press release article on another site. quite hard to find anything about them

this was all I could find: github.com/incognitochain/incognito…pecs/detail_reward_for_validator.md

LZA_Menace, That´s what i found too.

So they gave themselves 5%, in a PoS system?

But then they get all rewards too

No new people can join unless they sell

needmonero90, heh... yea didn´t think of that... lol

hey folks, i am using a ledger nano s and i created a wallet in wallet-cli and it works great, but when i try to open via the GUI is says, E Unable to open device 1:11415

ianthius: make sure that Ledger Live is closed.

selsta: i don't have that installed

dEBRUYNE: mentioned on reddit something about special char passwords... is that really a thing related to this?

No it is unrelated to this particular error

ianthius: What is the version of your Ledger Monero App (on the device)?

the latest, afaik, let me check

dEBRUYNE: 1.4.2

Please try 1.5.1, while it should also work with 1.4.2 using the latest version is better.

it opens in cli right now and then i close it and try to use the GUI by 'opening a wallet file' from the GUI and it asks for password then gives that error

Did you properly close the CLI with exit?

yes

sounds like my monero app is out of date then.

Unable to open device: 1:11415

You are using GUI v0.15.0.4 right?

means that the usb connection is still in use

try restarting your computer, it should solve the issue

dEBRUYNE: yes, that is correct

selsta: interesting, why wouldn't the cli wallet app complain too? because I can open it again with CLI, maybe some handshake between the apps that is still engaged?

because somehow the CLI didn’t free it properly, not sure why

maybe a new bug

selsta: dang, not a big fan of a reboot, i'll try disconnecting the wallet first

then i'll upgrade my monero app on the ledger

disconnecting and reconnecting seemed to work just fine. Something to look into though i suppose. I'll try to see if i can get a repro

hi

anyone from LocalBitcoins? need help with a controversy?

ianthius: To be clear, you managed to get it working with the GUI now?

looking for locabitcoins.com vendor for a help with a controversy

localbitcoins.com*

Maybe ask in a bitcoin channel.

dEBRUYNE: yes, thank you. It's working with the GUI. However, I have not had a chance to try and repro the bug that got me there in the first place.

If you manage to repro it, please post a bug report on Github :)

i will, not sure how relevant it will be though given that I am on an old version of the monero app on ledger... i should upgrade that

moneromoo I tried but none respond, so I tried here

i'd really like a faster HW though because if you choose not to export the view key this thing is soooo slow

even tried in the LocalBitcoins channel but nothing

The hardware is not good enough to calculate everything on device.

but guys LocalBitcoins is not anymore a good source of btc

is there any way to get some status to know what is happening when i do one of these without exporting the view key? just to know it's not hung?

I've been scammed 2 times in a row and opened the controversy but takes ages to respond

chrissssz: have you tried bisq?

ianthius: I wouldn’t even try it, unusably slow.

You should see the status refresh in monero-wallet-cli

^ ianthius

i will tri bisq

dEBRUYNE: yes, it did just now finally start giving me status

on the previous wallet i did export the view key and then it asked for my wallet password mid-refresh. which was strange, ( i think when it found a transaction?), but then the output got all messed up. So i just went to sleep and when I woke up everything was back to normal and it was displaying fine. But the nano was blank and the cli wasn't updating for a while.

The wallet will ask for the password if it receives an output

dEBRUYNE: does it keep syncing though if you don't type one in?

it basically got all horked after that one output was received (e.g. the terminal stopped being reponsive and the hardware wallet screen went MIA)

Afaik no

dEBRUYNE: that's too bad, since this process is so slow, it's really suited to set and forget for the hours it needs..

ianthius: Are you talking about CLI or GUI?

you can turn this off

`set ask-password 1`

but then your spend key will not be encrypted in memory

Hello!

selsta: thank you. So with the current wallet I am not exporting the view key, the output in the wallet-cli is stuck at a particular block height and not moving, any idea how to determine if it's stalled or just not reporting the progress?

Monero GUI v0.15.0.4 will not create a hardware wallet even when my Trezor is plugged in and unlocked.

Copenhagen_Bram: please continue to use GUI v0.15.0.2 until the next version is released.

we accidentally compiled without Trezor support.

ianthius: I would recommend to quit and retry with exported view key.

oof

selsta: i did this when the ledger first came out and it worked just fine, i don't want to export my view key. I guess i'll just let it run for a few hours and see what happens.

Copenhagen_Bram: alternatively you can compile the GUI yourself, it is quite easy

ianthius: ok, please report back

Where can I get hashes for previous versions of Monero?

they are included in the release notes on github, if you want signed hashes: reddit.com/r/Monero/comments/eaj3u6…i_v01502_carbon_chamaeleon_released

ah thanks, I meant to say signed hashes

for new chain when i do sweep_single for block that is v12 i have "no outputs found"

i need to mine and after sweep_single?

i thought that v12 block dont need more than 1 output

Is a remote node connection encrypted? I'd like to run a node on one computer and connect to it with monero-gui from the other computer over my LAN. Is that any less secure than running a local node on the same computer/

s/\//?/

AFAIK it uses SSL

Oh neat

How do I change the GUI's graphics mode to use SSL?

erm... I mean, software

instead of openGL

software rendering?

QMLSCENE_DEVICE=softwarecontext ./monero-wallet-gui

thanks

How do I connect to the node running on my other computer? I've put in the local IP address and 18081 as the port for a remote node in the GUI. But nothing happens when I click connect.